Site icon BusinessCrunch

Fix iPad Shows Charging But Battery Not Increasing: Complete Guide!

Fix iPad Shows Charging But Battery Not Increasing

The iPad’s battery life is excellent. But starting now, it still has to be charged. Your iPad may occasionally start charging when you plug it in. The battery life of your iPad won’t change in any way, though. If something has occurred to you, follow these steps to make things right:

We’ll go over every possible explanation for why your iPad may be showing that it is charging when the battery level is rising in this article, along with solutions.

How to fix the iPad Battery Not Increasing

We will move from the most common fix to the least common fix for each of the reasons we’ve listed below. By the end of the post, your battery ought to be ready to start charging, depending on the problem you’re having with your iPad.

Here is a simple table to assist you in determining the most likely reasons for this problem:

Launch a Restart

If the percentage of your battery is not rising, there may be a simple software problem to blame. Try again turning on and off your iPad. If that appears to be inoperable, we advise forcing an iPad restart. If the issue was caused by a straightforward software bug, you should be able to get your tablet back up and charging in any scenario.

Verify your temperature

If you change your tablet in difficult circumstances, your battery % won’t rise. You’ll frequently additionally receive a temperature warning. However, your battery percentage won’t rise if the temperature is too high to cause a warning but too high to damage the battery if charged.

Consider your ambient temperature as a quick and simple repair; if it is anywhere close to 45 C (113 F), your iPad won’t display a warning but won’t charge either. Take your iPad to a cooler location, and you should see an increase in battery life.

Verify Your Wattage

Your iPad will need more battery than your charger is able to supply if you have a very low-wattage charger. As a result, even though your battery is still charging, nothing changes. Consider this: if you have an iPad Pro M1 12.9″ and you begin charging it with a 5 W charger, it will take a very long time to charge (more than 6 hours!).

Add to that the fact that you begin utilizing your iPad as well. Your battery simply isn’t receiving enough charge right now to fully recharge. As a result, even while your battery is being charged, it will eventually run out of power. Otherwise, you’ll have a battery % that never rises.

Verify Your Cable

Your iPad may not charge properly if your cable is damaged or is not properly secured in the port. Usually, if your cable is broken, you will see a Not Charging sign. However, if your cable is only transferring a portion of the charge it is capable of, your iPad can be misled into thinking you are receiving the correct amount of charge when you aren’t.

Connecting your cable to another device is the simplest approach to determine whether it is damaged or not. If the device is charging properly, then the problem is with your iPad. Alternatively, you can try using a different cable with your iPad to see if it helps.

Examine both ends of the cable to completely eliminate your cable as the culprit. You should attempt charging your iPad after replacing the cable if it appears to have visible wiring, bent pins, or is blackened by residue (burn damage). Reset The iPad

Resetting your iPad ensures that there are no software errors or bugs that are preventing it from charging properly. This is a rare occurrence, however, it can occur if you recently had your iPad fixed or if it hasn’t been restarted in recent memory.

How to restart your iPad is as follows:

Open the Settings app on your iPad and choose General. Next, choose Transfer or Reset iPad. Finally, choose to Erase All Content and Settings.

At this point, adhere to the on-screen directions.

Examine your battery

If you’ve tried every possible solution, your iPad’s battery may have simply failed. or is actively working toward doing so. The typical warning indications of a malfunctioning battery are rapid battery discharge or diminished charging capacity.

An iPad that is two to three years old shouldn’t have these concerns. The battery will, however, have degraded by now if it is any older, especially if it has been used. As I’ve always said, it is extremely inconvenient that, unlike the iPhones, Apple does not provide a means to check the battery status on the iPad.

Therefore, if you encounter battery charging, yet battery percentage error, you can never be certain that your iPad’s battery is actually to blame. But essentially, this problem should be resolved by changing your battery. It is the last resort, though.

Is There Really a Problem With The iPad Battery Percentage Not Increasing?

Yes, there is a problem when your iPad’s battery percentage doesn’t rise. This is due to the fact that, even if your iPad may still be functional, it won’t be long before you start suffering other, more severe problems, such as your iPad not starting up if your battery is at fault.

Additionally, your battery needs to be fully charged frequently. The capacity of your battery gradually decreases permanently if that doesn’t happen since the electrons, which are accustomed to being charged up, don’t receive the current they require for a prolonged length of time.

Exit mobile version